• 欢迎来到Minecraft插件百科！
  • 对百科编辑一脸懵逼？帮助:快速入门带您快速熟悉百科编辑！
  • 因近日遭受攻击，百科现已限制编辑，有意编辑请加入插件百科企鹅群：223812289

“Terra/入门”的版本间的差异

来自Minecraft插件百科
跳转至： 导航、 搜索
小
第1行： 第1行：
−
{{模板:TRBox}}
+
{{模板:TRBox}}  
 +
 
 
本指南将概述创建自定义世界的过程。本指南将假设你有一个安装了能够正常运行的Terra的Minecraft服务器。
 
本指南将概述创建自定义世界的过程。本指南将假设你有一个安装了能够正常运行的Terra的Minecraft服务器。
  
第5行： 第6行：
  
 
= 准备工作 =
 
= 准备工作 =
 +
本节将介绍基本的工作设置，以及用模板创建配置。详见配置包页面。
  
−
This section goes over basic workspace setup, and creating a config from a template. See [https://github.com/PolyhedralDev/TerraDefaultConfig/wiki/Config-Packs Config Packs] for more information on config packs.
+
# 开一个安装了Terra的测试服务器。
−
 
+
# 用文本编辑器打开<code>plugins/Terra/config.yml</code>，并将<code>debug</code>设置为<code>true</code>。
−
<ol style="list-style-type: decimal;">
+
# 前往(<code>plugins/Terra/packs</code>)并复制<code>default</code>文件夹。随意命名你复制的文件夹，该教程将将新配置称为<code>example</code>。
−
<li><p>Set up a test server, and install and run Terra.</p></li>
+
# 用文本编辑器打开新包的目录，比如VS Code。请勿使用 Notepad/Notepad++！用支持浏览文件的文本编辑器可以更好地设置工作空间。
−
<li><p>Open <code>plugins/Terra/config.yml</code> in a text editor, and set <code>debug</code> to <code>true</code>.</p></li>
+
# 打开位于新配置包根目录的<code>pack.yml</code>。随意将<code>id</code>更改为你想使用的ID。该教程将<code>EXAMPLE</code>作为配置ID。
−
<li><p>Navigate to the packs directory (<code>plugins/Terra/packs</code>) and make a copy of the <code>default</code> directory. Name the copy whatever you want, this tutorial will call the new config <code>example</code>.</p></li>
+
# 将新配置应用于测试服的世界：
−
<li><p>Open the new pack directory in a text editor like VS Code. Do not use Notepad/Notepad++! You'll want to set up your workspace in a text editor with file browsing support.</p></li>
+
## 打开<code>bukkit.yml</code> （位于服务器根目录）
−
<li><p>Open <code>pack.yml</code>, found in the root directory of the new config pack. Change <code>id</code> to the ID you wish to assign your config. This tutorial will use <code>EXAMPLE</code> as the config ID.</p></li>
+
## 在文件末尾添加以下几行内容，将新的生成器分配给默认世界。
−
<li><p>Set your test server's world to use the new config:</p>
 
−
<ol style="list-style-type: decimal;">
 
−
<li><p>Open <code>bukkit.yml</code> (Found in the root of the server).</p></li>
 
−
<li><p>Assign your new generator to the default world by adding the following lines to the end of the file:</p></li></ol>
 
−
 
 
 
<pre class="">worlds:
 
<pre class="">worlds:
 
   world:
 
   world:
 
     generator: Terra:EXAMPLE
 
     generator: Terra:EXAMPLE
−
# Replace EXAMPLE with the ID of your config.</pre></li>
+
# 将EXAMPLE替换为你的配置ID。</pre>
−
<li><p>Stop your test server, delete the <code>world</code> folder, and start your server again. Your test server will now be using your new config pack!</p></li></ol>
+
# 删除<code>world</code>文件夹，重新开服。你的测试服现在就可以使用新的配置包了。
  
 
== 回顾 ==
 
== 回顾 ==
−
 
+
现在你复制了名为<code>EXAMPLE</code>的默认配置。该配置运行在你的测试服上且应用于主世界。你在VS Code里建立了调整该配置的工作空间。
−
You now have a copy of the default config, called <code>EXAMPLE</code>. It's running on your test server, and is assigned to the overworld. You have a workspace in VS Code set up to work on this new config.
 
  
 
= 配置世界 =
 
= 配置世界 =
 +
本节概述了在新配置中调整世界生成的许多选项。
  
−
This section overviews the many options available to adjust world generation in your new config.
+
在本节中，我们将通过对世界生成的一些基本变化来解释所有不同的设置。当调整配置时，请记住，大多数的值都可以实时重载！如果你的服务器处于调试模式，你只需输入/te reload即可重载所有配置。你将需要前往未生成的区块来查看变化。
−
 
 
−
In this section, we will go through some basic changes to the world generation to explain you all the different settings. When adjusting your configuration, remember that most values can be reloaded live! If your server is in debug mode, simply run <code>/te reload</code> to reload all configurations. You will need to fly into un-generated chunks to view any changes.
 
  
 
= 调整生成器 =
 
= 调整生成器 =
 +
Terra有大量可以从零开始配置世界生成的选项。本教程将从最大规模开始，然后缩小到更精细的生成选项。
  
−
Terra has a vast amount of options for configuring world generation from the ground up. This tutorial will begin at the largest scale, then narrow down into finer aspects of generation.
+
== 最大规模：“群系区” ==
−
 
+
一个群系区拥有生物群落网格（本页后面会概述）。区域定义了地形的巨大差异，例如下图是一个有5个网格的群系区：
−
== The Largest Scale: &quot;The Zone&quot; ==
 
−
 
 
−
A Biome Zone holds Biome Grids (overviewed later in this page). Zones generally define large differences in terrain, for example, in the image below, which shows a zone, there are 5 grids:
 
  
 
* 海洋
 
* 海洋
 
* 海滩
 
* 海滩
−
* Land
+
* 平原
−
* Mountains Low
+
* 低山
 
* 高山
 
* 高山
  
−
[[File:https://camo.githubusercontent.com/f415afa902e1f3af471757cb99dd710877c27509/68747470733a2f2f692e696d6775722e636f6d2f617962395967632e706e67|thumb|none]]
+
区域的每个部分都包含一个有独特地形的群系网格。例如所有属于OCEAN类别的群系都可能在世界中出现。
−
 
 
−
Each section of the zone contains a BiomeGrid with biomes containing unique types of terrain. For example, all biomes that fall under the OCEAN category should probably be grouped together in the world, so they would be arranged in the OCEAN grid, then put in the zone together.
 
−
 
 
−
The Biome Zone is configured in <code>pack.yml</code>. See the [https://github.com/PolyhedralDev/TerraDefaultConfig/wiki/pack.yml-Options#grids pack.yml page] for more information. The zone in the image above would be configured as:
 
  
−
<pre class="">grids:
+
群系区可在<code>pack.yml</code>中配置。详见pack.yml页面。图中区域的配置为：<pre class="">grids:
 
   - OCEAN
 
   - OCEAN
 
   - OCEAN
 
   - OCEAN
第63行： 第52行：
 
   - LAND
 
   - LAND
 
   - MOUNTAINS_LOW
 
   - MOUNTAINS_LOW
−
   - MOUNTAINS_HIGH</pre>
+
   - MOUNTAINS_HIGH</pre>列表的布局很重要！ 与群系区相邻的网格和群系区相连。以上面的例子为例，生成器必须将 BEACH 放在 OCEAN 和 LAND 网格之间，MOUNTAINSHIGH 必须与 MOUNTAINSLOW 相邻，MOUNTAINSLOW 必须与 MOUNTAINSHIGH 或 LAND 相邻。重复的网格允许制作更大的区域，例如海洋。
−
The layout of the list is important! Grids that are adjacent in the Biome Zone will be adjacent in the world. Using the above example, the generator must place BEACH between the OCEAN and LAND grids, MOUNTAINS''HIGH must border MOUNTAINS''LOW, and MOUNTAINS''LOW must border either MOUNTAINS''HIGH or LAND. Repeating grids allows to make larger areas of e.g. OCEAN.
 
  
−
The Biome Zone can be a maximum of 4096 grids long.
+
群系区最多可以有4096个网格。
  
−
Since there are already many default icy, ocean or mountain biomes (and you can create tons more), it would not be meaningful to start manually configuring which biomes can be next to each other at the largest scale. So let's rather define a collection of biomes that make up an environment, called a biome &quot;grid&quot;. You could have an &quot;ocean&quot; grid, a &quot;beach&quot; grid or a &quot;low mountain&quot; and a &quot;high mountain&quot; grid. Each grid then will be built of all the biomes that you think make sense for that grid. A biome can appear in several grids. For your Zone, you can then define which of these grids can be next to each other in a list. This list can be found for the default pack in <code>\plugins\Terra\packs\default\pack.yml</code>. Details how to configure this list can be found here: [https://github.com/PolyhedralDev/TerraDefaultConfig/wiki/Biome-Selection#biome-zones Biome-Selection#biome-zones].
+
由于已有很多默认的冰雪、海洋或山地群系（你还可以创建成大量群系），手动配置哪些群系可以在最大范围内相互毗邻毫无意义。那么就让我们定义“网格”为群系集合吧。你可以拥有“海洋”+“海滩”网格，或者“低山”+“高山”网格。每个网格将由所有你认为对该网格有意义的群系构成。一个群系可以出现在多个网格中。对于你的区域，你可以在列表中定义哪些网格可以相邻。默认配置包的列表位于\plugins\Terra\packs\default\pack.yml。配置该列表的详细信息位于群系选取页面。
  
 
Terra will go through that list and make sure that those grids are next to each other only in the sequence listed in pack.yml. While there is a complex randomization happening the background to determine which biome in the end will be next to each other, the rules of the zone's grid list will always be followed.
 
Terra will go through that list and make sure that those grids are next to each other only in the sequence listed in pack.yml. While there is a complex randomization happening the background to determine which biome in the end will be next to each other, the rules of the zone's grid list will always be followed.
第75行： 第63行：
  
 
== 群系网格 ==
 
== 群系网格 ==
−
 
+
Coming to the next level of detail now, you have to configure the grids that you listed in your pack.yml. Essentially, you can now define a 2-D pattern of biomes that you think look good next to each other in order to make the grid look nice. For each entry on your list in pack.yml, you need to have a file in <code>/plugins/Terra/packs/default/grids/</code> such as <code>ocean.yml</code>
−
[[File:https://camo.githubusercontent.com/598c91a9c3bdc27db9a07ac2c54866454678910c/68747470733a2f2f692e696d6775722e636f6d2f46536d667868342e706e67|fig:]] Coming to the next level of detail now, you have to configure the grids that you listed in your pack.yml. Essentially, you can now define a 2-D pattern of biomes that you think look good next to each other in order to make the grid look nice. For each entry on your list in pack.yml, you need to have a file in <code>/plugins/Terra/packs/default/grids/</code> such as <code>ocean.yml</code>
 
  
 
Within this file, there is a 2-dimensional list (hence a grid) of biomes that defines all the biomes that can appear in that grid. If biomes in this list are next to each other (vertically or horizontally), they will also have a chance to be next to each other in the real world. The neighboring biome will not be chosen by jumping diagonally.
 
Within this file, there is a 2-dimensional list (hence a grid) of biomes that defines all the biomes that can appear in that grid. If biomes in this list are next to each other (vertically or horizontally), they will also have a chance to be next to each other in the real world. The neighboring biome will not be chosen by jumping diagonally.
第83行： 第70行：
  
 
== 管理单个群系 ==
 
== 管理单个群系 ==
−
 
 
Biomes have several components, See [https://github.com/PolyhedralDev/TerraDefaultConfig/wiki/Biome-Configuration Biome-Configuration] for details. Some introduction of components here:
 
Biomes have several components, See [https://github.com/PolyhedralDev/TerraDefaultConfig/wiki/Biome-Configuration Biome-Configuration] for details. Some introduction of components here:
  
 
=== 表面形成 ===
 
=== 表面形成 ===
−
 
 
Minecraft worlds are dimensioned by X, Y and Z coordinates. Y is the height, the other two are North-South (X) and East-West (Z). Terra uses a so-called noise function that calculates how the world looks like.
 
Minecraft worlds are dimensioned by X, Y and Z coordinates. Y is the height, the other two are North-South (X) and East-West (Z). Terra uses a so-called noise function that calculates how the world looks like.
  

2020年10月30日 (五) 16:47的版本

Terra
页面

主页 · 原文

插件相关

Terra是什么 · 入门 · 配置包 · 方块调色板 · 群系选取

配置

世界配置 · 包配置 · 群系配置 · 群系网格配置 · 调色板配置 · 矿物配置 · 雕刻器配置 · 植被配置 · 树木配置 · 结构配置

教程

噪声方程 · 进阶噪声方程 · 搭建结构 · 噪声 · 权重池

信息

内置树木 · 内置植被

本指南将概述创建自定义世界的过程。本指南将假设你有一个安装了能够正常运行的Terra的Minecraft服务器。

本指南仍待完善。

准备工作

本节将介绍基本的工作设置，以及用模板创建配置。详见配置包页面。

  1. 开一个安装了Terra的测试服务器。
  2. 用文本编辑器打开plugins/Terra/config.yml，并将debug设置为true。
  3. 前往(plugins/Terra/packs)并复制default文件夹。随意命名你复制的文件夹，该教程将将新配置称为example。
  4. 用文本编辑器打开新包的目录，比如VS Code。请勿使用 Notepad/Notepad++！用支持浏览文件的文本编辑器可以更好地设置工作空间。
  5. 打开位于新配置包根目录的pack.yml。随意将id更改为你想使用的ID。该教程将EXAMPLE作为配置ID。
  6. 将新配置应用于测试服的世界：
    1. 打开bukkit.yml （位于服务器根目录）
    2. 在文件末尾添加以下几行内容，将新的生成器分配给默认世界。
worlds:
  world:
    generator: Terra:EXAMPLE
# 将EXAMPLE替换为你的配置ID。
  1. 删除world文件夹，重新开服。你的测试服现在就可以使用新的配置包了。

回顾

现在你复制了名为EXAMPLE的默认配置。该配置运行在你的测试服上且应用于主世界。你在VS Code里建立了调整该配置的工作空间。

配置世界

本节概述了在新配置中调整世界生成的许多选项。

在本节中，我们将通过对世界生成的一些基本变化来解释所有不同的设置。当调整配置时，请记住，大多数的值都可以实时重载！如果你的服务器处于调试模式，你只需输入/te reload即可重载所有配置。你将需要前往未生成的区块来查看变化。

调整生成器

Terra有大量可以从零开始配置世界生成的选项。本教程将从最大规模开始，然后缩小到更精细的生成选项。

最大规模：“群系区”

一个群系区拥有生物群落网格（本页后面会概述）。区域定义了地形的巨大差异，例如下图是一个有5个网格的群系区：

  • 海洋
  • 海滩
  • 平原
  • 低山
  • 高山

区域的每个部分都包含一个有独特地形的群系网格。例如所有属于OCEAN类别的群系都可能在世界中出现。

群系区可在pack.yml中配置。详见pack.yml页面。图中区域的配置为：

grids:
  - OCEAN
  - OCEAN
  - BEACH
  - BEACH
  - LAND
  - LAND
  - MOUNTAINS_LOW
  - MOUNTAINS_HIGH

列表的布局很重要！ 与群系区相邻的网格和群系区相连。以上面的例子为例，生成器必须将 BEACH 放在 OCEAN 和 LAND 网格之间，MOUNTAINSHIGH 必须与 MOUNTAINSLOW 相邻，MOUNTAINSLOW 必须与 MOUNTAINSHIGH 或 LAND 相邻。重复的网格允许制作更大的区域，例如海洋。

群系区最多可以有4096个网格。

由于已有很多默认的冰雪、海洋或山地群系（你还可以创建成大量群系），手动配置哪些群系可以在最大范围内相互毗邻毫无意义。那么就让我们定义“网格”为群系集合吧。你可以拥有“海洋”+“海滩”网格，或者“低山”+“高山”网格。每个网格将由所有你认为对该网格有意义的群系构成。一个群系可以出现在多个网格中。对于你的区域，你可以在列表中定义哪些网格可以相邻。默认配置包的列表位于\plugins\Terra\packs\default\pack.yml。配置该列表的详细信息位于群系选取页面。

Terra will go through that list and make sure that those grids are next to each other only in the sequence listed in pack.yml. While there is a complex randomization happening the background to determine which biome in the end will be next to each other, the rules of the zone's grid list will always be followed.

To start with, it's highly recommended to have Ocean biomes on the one end of the list and Mountain on the other with flat land in the middle, as in the default pack.

群系网格

Coming to the next level of detail now, you have to configure the grids that you listed in your pack.yml. Essentially, you can now define a 2-D pattern of biomes that you think look good next to each other in order to make the grid look nice. For each entry on your list in pack.yml, you need to have a file in /plugins/Terra/packs/default/grids/ such as ocean.yml

Within this file, there is a 2-dimensional list (hence a grid) of biomes that defines all the biomes that can appear in that grid. If biomes in this list are next to each other (vertically or horizontally), they will also have a chance to be next to each other in the real world. The neighboring biome will not be chosen by jumping diagonally.

This list can be maximum the same length as the Zone file grid list (4096) in either direction, so quite huge if you need to. You can find more information about Biome Grids here: Biome-Selection#biome-grids

管理单个群系

Biomes have several components, See Biome-Configuration for details. Some introduction of components here:

表面形成

Minecraft worlds are dimensioned by X, Y and Z coordinates. Y is the height, the other two are North-South (X) and East-West (Z). Terra uses a so-called noise function that calculates how the world looks like.

Can't find what you're looking for? Join our Discord server and we'll be happy to help you!

To see these configurations in the wild, check out our Default Config!

取自“https://mineplugin.org/index.php?title=Terra/入门&oldid=13172”