Citizens/角色/建筑者 - 版本历史

Qsefthuopq：/* 指令 */

2018-11-24T05:26:43Z

指令

←上一版本		2018年11月24日 (六) 05:26的版本
第224行：		第224行：
	所有命令可以通过选取npc后输入 (<code>/builder [command]</code>), 过显示或输入 <code>/builder [npcid] [command]</code>.		所有命令可以通过选取npc后输入 (<code>/builder [command]</code>), 过显示或输入 <code>/builder [npcid] [command]</code>.

	'''/builder list''' - ~~Lists all available schematics in the configured schematics folder~~. ~~Does not require a builder selected~~.		'''/builder list''' - 列出所有放在我指定文件夹内可用的schematics . 这个指令不需要选取叫建筑者.

	'''/builder load [schematic]''' - ~~Loads a~~ .schematic ~~file~~. ~~simply use the name of the schematic~~.		'''/builder load [schematic]''' - 加载一个 .schematic 文件. 只需要输入 schematic文件名.
	~~Example~~		如
	/builder load house		/builder load house

	'''/builder origin''' - Sets the origin of the builder's projects to the builder's current location. Allows you to re-build in the same spot. ~~If this is not set 建筑者会 always start from his current location.~~		'''/builder origin''' - Sets the origin of the builder's projects to the builder's current location. Allows you to re-build in the same spot.如果没有设置这个，建筑者会从他所在位置开始建筑。

	'''/builder origin clear''' - ~~Clears~~ the saved build origin.		'''/builder origin clear''' - 清除Clears the saved build origin.

	'''/builder origin schematic''' - Sets the origin of the builder's projects to the origin of the loaded schematic. Best used for schematics created from the builder's world with worldedit.		'''/builder origin schematic''' - Sets the origin of the builder's projects to the origin of the loaded schematic. Best used for schematics created from the builder's world with worldedit.

Qsefthuopq：/* 配置 */

2018-11-23T06:19:33Z

配置

←上一版本		2018年11月23日 (五) 06:19的版本
第217行：		第217行：

	==配置==		==配置==
	~~See~~ [[~~Builder~~/~~Configuration~~\|~~Configuration~~]].		请查看[[citizens /角色/配置\|配置]]这一页面来了解配置选项.

	~~Builder会在~~ ''Builder/config.yml''创建新的配置~~. Be sure to check the configuration page if new options are 添加~~.		建筑者插件会在 ''Builder/config.yml''创建新的配置.

	==指令==		==指令==

2018年11月23日 (五) 06:15 Qsefthuopq

2018-11-23T06:15:57Z

显示更改

2018年11月15日 (四) 14:34 Qsefthuopq

2018-11-15T14:34:18Z

显示更改

2018年11月12日 (一) 15:01 Qsefthuopq

2018-11-12T15:01:01Z

←上一版本		2018年11月12日 (一) 15:01的版本
第23行：		第23行：
	{{scrollbox\|		{{scrollbox\|

	'''Builder For CraftBukkit 1.10+''' [http://ci.citizensnpcs.co/job/Builder/18/artifact/target/Builder.jar ~~download~~]		'''Builder For CraftBukkit 1.10+''' [http://ci.citizensnpcs.co/job/Builder/18/artifact/target/Builder.jar 下载]
	* 由Morphan1更新		* 由Morphan1更新

	'''Builder For CraftBukkit 1.9.4''' [http://ci.citizensnpcs.co/job/Builder/13/artifact/target/Builder.jar ~~download~~]		'''Builder For CraftBukkit 1.9.4''' [http://ci.citizensnpcs.co/job/Builder/13/artifact/target/Builder.jar 下载]
	* 由Morphan1更新		* 由Morphan1更新

	'''Builder For CraftBukkit 1.9''' [http://ci.citizensnpcs.co/job/Builder/12/artifact/target/Builder.jar ~~download~~]		'''Builder For CraftBukkit 1.9''' [http://ci.citizensnpcs.co/job/Builder/12/artifact/target/Builder.jar 下载]
	* 由Morphan1更新		* 由Morphan1更新

	'''Builder For CraftBukkit 1.8.7''' [http://ci.citizensnpcs.co/job/Builder/9/artifact/target/Builder.jar ~~download~~]		'''Builder For CraftBukkit 1.8.7''' [http://ci.citizensnpcs.co/job/Builder/9/artifact/target/Builder.jar 下载]
	* 由Morphan1更新		* 由Morphan1更新

	'''Builder For CraftBukkit 1.8.3''' [http://ci.citizensnpcs.co/job/Builder/4/artifact/target/Builder.jar ~~download~~]		'''Builder For CraftBukkit 1.8.3''' [http://ci.citizensnpcs.co/job/Builder/4/artifact/target/Builder.jar 下载]
	* 由Morphan1更新		* 由Morphan1更新

	'''Builder For CraftBukkit 1.8''' [http://ci.citizensnpcs.co/job/Builder/3/artifact/target/Builder.jar ~~download~~]		'''Builder For CraftBukkit 1.8''' [http://ci.citizensnpcs.co/job/Builder/3/artifact/target/Builder.jar 下载]
	* 由Morphan1更新		* 由Morphan1更新

	'''v. 0.9.1 build 2''' 6/3/2014 [http://ci.citizensnpcs.co/job/Builder/2/artifact/target/Builder.jar ~~download~~]		'''v. 0.9.1 build 2''' 6/3/2014 [http://ci.citizensnpcs.co/job/Builder/2/artifact/target/Builder.jar 下载]
	* 更新至 craftbukkit 1.7.10		* 更新至 craftbukkit 1.7.10

	'''v. 0.9.1''' 6/3/2014 [http://www.sendspace.com/file/646mvv ~~download~~]		'''v. 0.9.1''' 6/3/2014 [http://www.sendspace.com/file/646mvv 下载]
	* 更新至 craftbukkit 1.7.9		* 更新至 craftbukkit 1.7.9

	'''v. 0.9.0''' 12/11/2013 [http://www.sendspace.com/file/5q3v9h ~~download~~]		'''v. 0.9.0''' 12/11/2013 [http://www.sendspace.com/file/5q3v9h 下载]
	* 更新至 craftbukkit 1.7.2		* 更新至 craftbukkit 1.7.2

	'''v. 0.8.2''' 9/20/2013 [http://www.sendspace.com/file/3qk2qa ~~download~~]		'''v. 0.8.2''' 9/20/2013 [http://www.sendspace.com/file/3qk2qa 下载]
	* 更新至 craftbukkit 1.6.4		* 更新至 craftbukkit 1.6.4

	'''v. 0.8.1''' 8/8/2013 [http://www.sendspace.com/file/sb8tfc ~~download~~]		'''v. 0.8.1''' 8/8/2013 [http://www.sendspace.com/file/sb8tfc 下载]
	* added ''silent'' build option that suppresses the messages builder sends to the person who started a build.		* added ''silent'' build option that suppresses the messages builder sends to the person who started a build.
	* Fixed excavate option so it works.		* Fixed excavate option so it works.

	'''v. 0.8''' 7/29/2013 [http://www.sendspace.com/file/4yhc12 ~~download~~]		'''v. 0.8''' 7/29/2013 [http://www.sendspace.com/file/4yhc12 下载]
	*Builders have gone to engineering school and now support tile entities (chest contents, sign text, skull types, command blocks, etc...)		*Builders have gone to engineering school and now support tile entities (chest contents, sign text, skull types, command blocks, etc...)
	*Added command /builder origin x,y,z		*Added command /builder origin x,y,z
第64行：		第64行：
	*Fix warning at startup.		*Fix warning at startup.

	'''v. 0.7.2 ''' 7/9/2013 [http://www.sendspace.com/file/imftlv ~~download~~]		'''v. 0.7.2 ''' 7/9/2013 [http://www.sendspace.com/file/imftlv 下载]
	*Compatible with Bukkit 1.6.2		*Compatible with Bukkit 1.6.2

	'''v. 0.7.1 ''' 7/3/2013 [http://www.sendspace.com/file/xkjvbb ~~download~~]		'''v. 0.7.1 ''' 7/3/2013 [http://www.sendspace.com/file/xkjvbb 下载]
	*Compatible with Bukkit 1.6.1		*Compatible with Bukkit 1.6.1
	*Compatible with Denizen .9		*Compatible with Denizen .9

	'''v. 0.7 ''' 6/27/2013 [http://www.sendspace.com/file/v7td6n ~~download~~]		'''v. 0.7 ''' 6/27/2013 [http://www.sendspace.com/file/v7td6n 下载]
	*Supply mode is now customizable		*Supply mode is now customizable

	'''v. 0.6.9 ''' 5/4/2013 [http://www.sendspace.com/file/smy3z8 ~~download~~]		'''v. 0.6.9 ''' 5/4/2013 [http://www.sendspace.com/file/smy3z8 下载]
	* 更新至 craftbukkit 1.5.2		* 更新至 craftbukkit 1.5.2
	* Properly group new blocks from 1.4.7 and 1.5.x updates.		* Properly group new blocks from 1.4.7 and 1.5.x updates.
	* Add server-wide setting so that Supply mode requires exact blocks.		* Add server-wide setting so that Supply mode requires exact blocks.

	'''v. 0.6.8.1 ''' 3/21/2013 [http://www.sendspace.com/file/nv50m2 ~~download~~]		'''v. 0.6.8.1 ''' 3/21/2013 [http://www.sendspace.com/file/nv50m2 下载]
	* 更新至 craftbukkit 1.5.1		* 更新至 craftbukkit 1.5.1

	'''v. 0.6.8 ''' 3/19/2013 [http://www.sendspace.com/file/x36t95 ~~download~~]		'''v. 0.6.8 ''' 3/19/2013 [http://www.sendspace.com/file/x36t95 下载]
	* Compatibility with cb 1.5, citizens 2.0.8, and Denizen .8		* Compatibility with cb 1.5, citizens 2.0.8, and Denizen .8

	'''v. 0.6.7 ''' 1/19/2013 [http://www.sendspace.com/file/dwm2gl ~~download~~]		'''v. 0.6.7 ''' 1/19/2013 [http://www.sendspace.com/file/dwm2gl 下载]
	* Compatibility with cb 1.4.7		* Compatibility with cb 1.4.7

	'''v. 0.6.6 final ''' 1/4/2013 [http://www.sendspace.com/file/49vrxe ~~download~~]		'''v. 0.6.6 final ''' 1/4/2013 [http://www.sendspace.com/file/49vrxe 下载]
	* Use with cb 1.4.6		* Use with cb 1.4.6
	* Fix persistence bug with needed materials in supply mode and layers build option.		* Fix persistence bug with needed materials in supply mode and layers build option.

	'''v. 0.6.6b ''' 12/22/2012 [http://www.sendspace.com/file/634eev ~~download~~]		'''v. 0.6.6b ''' 12/22/2012 [http://www.sendspace.com/file/634eev 下载]
	* Compatibility with CraftBukkit 1.4.6r0.1 and Citizens2 2.0.6.		* Compatibility with CraftBukkit 1.4.6r0.1 and Citizens2 2.0.6.

	'''v. 0.6.5''' 12/20/2012 [http://www.sendspace.com/file/5xpctb ~~download~~]		'''v. 0.6.5''' 12/20/2012 [http://www.sendspace.com/file/5xpctb 下载]
	* Compatibility with CraftBukkit 1.4.5r1.0 and Citizens2 2.0.5 Release.		* Compatibility with CraftBukkit 1.4.5r1.0 and Citizens2 2.0.5 Release.

第194行：		第194行：
	}}		}}

	<!-- ~~THIS SECTION IS BROKEN~~		<!-- 这一部分已损坏
	{\|		{\|
	{{#ev:youtube\|UyAR7-_17XY\|}} \|{{#ev:youtube\|ZiYhFZi5vB0\|}} \| {{#ev:youtube\|HOxX9pb--NQ\|}} \| {{#ev:youtube\|KS4v17Y8xcA\|}}		{{#ev:youtube\|UyAR7-_17XY\|}} \|{{#ev:youtube\|ZiYhFZi5vB0\|}} \| {{#ev:youtube\|HOxX9pb--NQ\|}} \| {{#ev:youtube\|KS4v17Y8xcA\|}}
第200行：		第200行：
	-->		-->

	==~~Installation~~==		==安装==
	*~~Install~~ Citizens 2		*安装 Citizens 2
	*~~Place~~ Builder.jar ~~file in~~ /plugins directory.		*把 Builder.jar 放到 /plugins directory.
	*~~Place~~ .schematic ~~files in~~ /plugins/Builder/schematics/		*把 .schematic 文件放到 /plugins/Builder/schematics/
	*开启服务器		*开启服务器
	*创建一个NPC并给予Builder特性.		*创建一个NPC并给予Builder特性.

2018年11月12日 (一) 14:58 Qsefthuopq

2018-11-12T14:58:43Z

←上一版本		2018年11月12日 (一) 14:58的版本
第20行：		第20行：

	__TOC__		__TOC__
	==~~Updates~~==		==更新记录==
	{{scrollbox\|		{{scrollbox\|

第247行：		第247行：

	'''/builder build (option1) (option2) ... etc''' - Start building the schematic. This command takes several optional arguments. The order does not matter. you can add to this command the following:		'''/builder build (option1) (option2) ... etc''' - Start building the schematic. This command takes several optional arguments. The order does not matter. you can add to this command the following:
	*linear - ~~build north to south~~		*linear - 由北到南建筑
	*reverselinear - ~~build south to north~~		*reverselinear - 由南到北建筑
	*sprial - ~~build inside to outside~~ (~~this is the default and thus does not need to be specified~~.)		*sprial - 由内到外建筑 (默认建筑方式.)
	*reversespiral - ~~build outside to inside~~.		*reversespiral - 由外到内建筑.
	*excavate - ~~The builder will clear out the area of blocks before starting to place them~~.		*excavate - 建筑者会先清空区域内的杂物再进行建筑.
	*layers:# - ~~The builder will build~~ # ~~number of layers at a time~~, ~~the default is~~ 1.		*layers:# - 建筑者会一次建造 # 个layers, 默认为 1.
	*yoffset:# - The builder will start building the specified number of blocks up or down from the set starting location.		*yoffset:# - The builder will start building the specified number of blocks up or down from the set starting location.
	*groupall - the builder will build all of a group of materials at once, instead of doing it per layer.		*groupall - the builder will build all of a group of materials at once, instead of doing it per layer.
第262行：		第262行：
	*silent - the builder will not send completion/error messages to the command sender.		*silent - the builder will not send completion/error messages to the command sender.

	~~Examples~~:		示例:
	/builder build		/builder build
	/builder build excavate reverselinear yoffset:-3		/builder build excavate reverselinear yoffset:-3
第297行：		第297行：
	*By default, NPCs despawn when their chunk unloads. This behavior can be changed in the Citizens2 config.yml, and is recommended if you would like builders to continue to work unattended.		*By default, NPCs despawn when their chunk unloads. This behavior can be changed in the Citizens2 config.yml, and is recommended if you would like builders to continue to work unattended.

	==~~Supply Mode~~==		==Supply模式==
	If the Builder is set to require materials for building (with ''/builder supply true''), he will go into Supply Mode when ''/builder build'' is called. When Supply Mode starts the Builder will survey the build site and generate a list of required materials to start building. Players must provide these materials for the builder to begin.		If the Builder is set to require materials for building (with ''/builder supply true''), he will go into Supply Mode when ''/builder build'' is called. When Supply Mode starts the Builder will survey the build site and generate a list of required materials to start building. Players must provide these materials for the builder to begin.

	~~While in Supply Mode~~:		在Supply 模式时:
	* ~~Right-Click the Builder~~ with an empty hand to view the list of materials still needed.		* 空手右键建筑者来查看所需材料 with an empty hand to view the list of materials still needed.
	* Right-Click the Builder with any block or item to see if he needs it. If he does, he will tell you how much he still needs.		* Right-Click the Builder with any block or item to see if he needs it. If he does, he will tell you how much he still needs.
	* After clicking with a needed material, Right-Click again within a few seconds to give it to the Builder.		* After clicking with a needed material, Right-Click again within a few seconds to give it to the Builder.

Qsefthuopq：创建页面，内容为“{{Trait | PICTURE = Builder.png | AUTHOR = jrbudda | NAME = Builder | VERSION = 0.9.1 build 2 | CITIZENSBUILD = [http://ci.citizensnpcs.co/job…”

2018-11-11T06:14:45Z

创建页面，内容为“{{Trait | PICTURE = Builder.png | AUTHOR = jrbudda | NAME = Builder | VERSION = 0.9.1 build 2 | CITIZENSBUILD = [http://ci.citizensnpcs.co/job…”

新页面

{{Trait
| PICTURE = Builder.png
| AUTHOR = jrbudda
| NAME = Builder
| VERSION = 0.9.1 build 2
| CITIZENSBUILD = [http://ci.citizensnpcs.co/job/Citizens2/ 2.0.20] (Craftbukkit 1.10+)
| DEVSTATUS = Release
| DEPENDS = 无.
| DOWNLOADLINK = http://ci.citizensnpcs.co/job/Builder/lastSuccessfulBuild/
| DESCRIPTION = 可以让NPC建筑.
}}

===注意:===
===这个插件的作者并不活跃. 目前这款插件只会更新新版本Minecraft的兼容而无法保证这些构建的稳定性和功能性.===

'''Builder''' 插件可以给予NPC[[Citizens/角色|特性]]来:
* 一格一格地建筑 MCEdit/Worldedit的 schematics.
* 重建一片区域,修复被毁灭的一切.
* 需要玩家给予所需建材才能建筑.

__TOC__
==Updates==
{{scrollbox|

'''Builder For CraftBukkit 1.10+''' [http://ci.citizensnpcs.co/job/Builder/18/artifact/target/Builder.jar download]
* 由Morphan1更新

'''Builder For CraftBukkit 1.9.4''' [http://ci.citizensnpcs.co/job/Builder/13/artifact/target/Builder.jar download]
* 由Morphan1更新

'''Builder For CraftBukkit 1.9''' [http://ci.citizensnpcs.co/job/Builder/12/artifact/target/Builder.jar download]
* 由Morphan1更新

'''Builder For CraftBukkit 1.8.7''' [http://ci.citizensnpcs.co/job/Builder/9/artifact/target/Builder.jar download]
* 由Morphan1更新

'''Builder For CraftBukkit 1.8.3''' [http://ci.citizensnpcs.co/job/Builder/4/artifact/target/Builder.jar download]
* 由Morphan1更新

'''Builder For CraftBukkit 1.8''' [http://ci.citizensnpcs.co/job/Builder/3/artifact/target/Builder.jar download]
* 由Morphan1更新

'''v. 0.9.1 build 2''' 6/3/2014 [http://ci.citizensnpcs.co/job/Builder/2/artifact/target/Builder.jar download]
* 更新至 craftbukkit 1.7.10

'''v. 0.9.1''' 6/3/2014 [http://www.sendspace.com/file/646mvv download]
* 更新至 craftbukkit 1.7.9

'''v. 0.9.0''' 12/11/2013 [http://www.sendspace.com/file/5q3v9h download]
* 更新至 craftbukkit 1.7.2

'''v. 0.8.2''' 9/20/2013 [http://www.sendspace.com/file/3qk2qa download]
* 更新至 craftbukkit 1.6.4

'''v. 0.8.1''' 8/8/2013 [http://www.sendspace.com/file/sb8tfc download]
* added ''silent'' build option that suppresses the messages builder sends to the person who started a build.
* Fixed excavate option so it works.

'''v. 0.8''' 7/29/2013 [http://www.sendspace.com/file/4yhc12 download]
*Builders have gone to engineering school and now support tile entities (chest contents, sign text, skull types, command blocks, etc...)
*Added command /builder origin x,y,z
*Maybe some improvements to memory usage on large schematics.
*Added command block to default list of blocks not needed for supply mode.
*Fix warning at startup.

'''v. 0.7.2 ''' 7/9/2013 [http://www.sendspace.com/file/imftlv download]
*Compatible with Bukkit 1.6.2

'''v. 0.7.1 ''' 7/3/2013 [http://www.sendspace.com/file/xkjvbb download]
*Compatible with Bukkit 1.6.1
*Compatible with Denizen .9

'''v. 0.7 ''' 6/27/2013 [http://www.sendspace.com/file/v7td6n download]
*Supply mode is now customizable

'''v. 0.6.9 ''' 5/4/2013 [http://www.sendspace.com/file/smy3z8 download]
* 更新至 craftbukkit 1.5.2
* Properly group new blocks from 1.4.7 and 1.5.x updates.
* Add server-wide setting so that Supply mode requires exact blocks.

'''v. 0.6.8.1 ''' 3/21/2013 [http://www.sendspace.com/file/nv50m2 download]
* 更新至 craftbukkit 1.5.1

'''v. 0.6.8 ''' 3/19/2013 [http://www.sendspace.com/file/x36t95 download]
* Compatibility with cb 1.5, citizens 2.0.8, and Denizen .8

'''v. 0.6.7 ''' 1/19/2013 [http://www.sendspace.com/file/dwm2gl download]
* Compatibility with cb 1.4.7

'''v. 0.6.6 final ''' 1/4/2013 [http://www.sendspace.com/file/49vrxe download]
* Use with cb 1.4.6
* Fix persistence bug with needed materials in supply mode and layers build option.

'''v. 0.6.6b ''' 12/22/2012 [http://www.sendspace.com/file/634eev download]
* Compatibility with CraftBukkit 1.4.6r0.1 and Citizens2 2.0.6.

'''v. 0.6.5''' 12/20/2012 [http://www.sendspace.com/file/5xpctb download]
* Compatibility with CraftBukkit 1.4.5r1.0 and Citizens2 2.0.5 Release.

'''v. 0.6.4''' 12/9/2012
* Compatibility with latest craftbukkit 1.4.5 r.03 and citizens2 build 606+.

'''v. 0.6.3''' 11/30/2012
* Compatible with craftbukkit 1.4.4 - 1.4.5 r0.2 and citizens2 build 597.
* Fix crops/seeds error.
* Accept either type of pressure plate for supply mode.

'''v. 0.6.2''' 10/29/2012
* 更新至 cb 1.4.2... with NOT work with 1.3 !

'''v. 0.6.1''' 10/25/2012
* Final fixes to supply mode. Release of .6

'''v. 0.6 ALPHA3''' 10/19/2012 {{color|green|white| This is a test release to ferret out any oddities in Supply Mode, please let me know if it doesn't work like it should}}
* Fixed supply requirement for glass blocks and panes, melon, bookshelves, ender chests, snow, ice, double slabs.
* Changed supply requirement for stairs: all wood stairs count as 'oak wood stairs'. All stone stairs (except nether brick) count as 'stone brick stairs'. This is to match the behavior with slabs.

'''v. 0.6 ALPHA2''' 10/15/2012 {{color|green|white| This is a test release to ferret out any oddities in Supply Mode, please let me know if it doesn't work like it should}}
* Added builder.donate permission. This allows players to donate to a builder in supply mode.
* Fix calling ''build'' from the console.

'''v. 0.6 ALPHA''' 10/14/2012 {{color|green|white| This is a test release to ferret out any oddities in Supply Mode, please let me know if it doesn't work like it should}}
* '''Supply Mode''' - Builders can now be set so that players must provide all the materials before the builder will start building. use ''/builder supply true'' to turn this on, then call ''/builder build'' as usual.
** Once build is called the Builder will go into [[#Supply Mode|Supply mode]]. See section for details.
** Only those blocks actually needed will be required (if some are already in place)
** The collected materials will persist if the server is restarted.
** Localized names are used for all items and blocks. (based on server language setting)
** If the build is canceled the collected items are lost.
** Unobtainable blocks are supplied by giving their normal drop type (example: Cobwebs require players to supply String). Please let me know if I missed any.
* Fixed 'mark' and 'schematic origin' sometimes being off by 1 block.
* Moved the 'nohold' build option to its own command: /builder hold true/false
* Added onstart: build option, this will run a Denizen task when the builder starts building (after collecting required materials, if set)

'''v. 0.5.1 Beta''' 10/4/2012
* Added command /builder list
* Added build option: yoffset

'''v. 0.5 Beta''' 9/25/2012
* It is highly recommenced you use this with build 382+ of citizens2. 382 has some pathfinding fixes that make high /npc speed settings less... undesirable.
* Builders loaded with the same schematic will share it in memory. Reduces RAM overhead.
* Schematics are now pre-processed right when you call build, this has the following consequences:
** Less memory usage for the to-build list
** /builder info now shows total block count, blocks remaining, and a % complete during the build.
** new command: '''survey''' shows the material list required to build in the current location, taking into account what is already there.
** You may experience a small server hiccup when you call build for VERY large schematics (millions of blocks) Hope to reduce this for the future.
* New command: '''timeout''' sets the maximum time between blocks. Can be set as low as 0.1 seconds. (The fastest possible build speed is about 5 blocks per second.)

'''v. 0.4.1 Beta''' 9/18/2012
* '''Verical Build options''' you can now specify layers:X to build X number of layers at a time. Significantly speeds up building.
* '''Grouping option''' you can specify groupall to build ALL of one group of materials at a time (instead of doing it at every set of layers)
* added commands: origin me, origin current
* excavate works from the top down, as you would expect.

'''v. 0.4 Beta''' 9/16/2012
* '''New build order''' Builder now places items in groupings based on item type: base blocks, furniture, redstone, liquids, and decorations. This is done ''per layer'' because I didn't like how it looked building all the layers of one type first. Maybe configurable later.
* '''New build patterns!''' builders can use: spiral, linear, reversespiral or reverselinear (this is for the x-z plane, builders still build from the bottom layer up, 1 layer at a time... for now!) the default is spiral.
*(Okay I'll admit this sort of lets you use up to 4 builders on 1 schematic if they have the same origin and different patterns... but shhh it's our secret :))
* '''Excavate mode!''' builders can optionally dig out the area before building!
* '''Configuration!''' Builder now makes a config.yml that can be used to change the default schematics directory. messages and allowable 'marking' materials.
* Holding items! Player and Endermen-type builders will now hold the item they are about to place, or a pickaxe if breaking blocks.
* Fix mob-type builders, they no longer crash clients because cows can't swing their arms!
* the ignoreliquid and ignoreair commands have been {{color|red|white|removed}} specify these options when calling /builder build.
* Hooked into dynmap to trigger an area render on completion/cancellation of build.

'''v. 0.3.2 Beta''' 9/13/2012
* Builder will remove previous marks before building or placing new ones.
* Fix skipping first block in schematic.
* Improved error messages an other minor fixes.
* Target Java 6 instead of 7.

'''v. 0.3.1 Alpha''' 9/12/2012
* Pathing and other minor bugfixes.
* fix /builder mark
* /builder help actually provides help.

'''v. 0.3 Alpha''' 9/11/2012
* Added Denizen Task script execution option on build completion and cancellation.
* Reduced memory usage of loaded schematics by 80%.
* Last loaded schematic is now persistent.
* Lots of updates to messages and info.

'''v. 0.2.1 Alpha''' 9/9/2012
* added commands origin clear, origin schematic, check, compare

'''v. 0.2 Alpha''' 9/9/2012
*Added commands ignoreair, ignoreliquid, origin, info

'''v. 0.1.1 Alpha''' 9/9/2012
*Added Mark command.
*Better pathing.

'''v. 0.1 Alpha''' 9/9/2012
* First release
}}



==Installation==
*Install Citizens 2
*Place Builder.jar file in /plugins directory.
*Place .schematic files in /plugins/Builder/schematics/
*开启服务器
*创建一个NPC并给予Builder特性.
/npc create Bob --trait builder
or
/npc create Bob
/trait builder

==权限==
*''builder.*'' 建筑者的所有权限
*''builder.[command]'' 某个指令的权限
*''builder.donate'' 可以让玩家donate to a builder in Supply Mode (用于锁定创造模式的玩家)

==配置==
See [[Builder/Configuration|Configuration]].

Builder会在 ''Builder/config.yml''创建新的配置. Be sure to check the configuration page if new options are added.

==指令==
All commands can be run on a selected NPC as shown (<code>/builder [command]</code>), or on a target NPC with <code>/builder [npcid] [command]</code>.

'''/builder list''' - Lists all available schematics in the configured schematics folder. Does not require a builder selected.

'''/builder load [schematic]''' - Loads a .schematic file. simply use the name of the schematic.
Example
/builder load house

'''/builder origin''' - Sets the origin of the builder's projects to the builder's current location. Allows you to re-build in the same spot. If this is not set the builder will always start from his current location.

'''/builder origin clear''' - Clears the saved build origin.

'''/builder origin schematic''' - Sets the origin of the builder's projects to the origin of the loaded schematic. Best used for schematics created from the builder's world with worldedit.

'''/builder origin me''' - Sets the origin of the builder's projects to the player's position. Does not work from the console.

'''/builder origin current''' - Sets the origin of the builder's projects to the origin of the project currently being built. Use this if you forgot to set the origin before starting to build, and need to cancel it to resume later.

'''/builder origin x,y,z''' - Sets the origin of the builder's projects to the location x,y,z of the builder's current world.

'''/builder mark (item)''' - Places a block at the 4 corners of the footprint, then returns to the origin, so you can see where it's going to build. You can specify the item to use, although that item must be allowed in the config.yml. The first item on the list in the config is the default if no item is specified. If the config is missing the builder will use GLASS.

'''/builder timeout [value]''' - Sets the maximum time, in seconds, between blocks. Valid values are 0.1 - 2000000.0. Default is 2.0. Default can be changed in the config.yml.

'''/builder build (option1) (option2) ... etc''' - Start building the schematic. This command takes several optional arguments. The order does not matter. you can add to this command the following:
*linear - build north to south
*reverselinear - build south to north
*sprial - build inside to outside (this is the default and thus does not need to be specified.)
*reversespiral - build outside to inside.
*excavate - The builder will clear out the area of blocks before starting to place them.
*layers:# - The builder will build # number of layers at a time, the default is 1.
*yoffset:# - The builder will start building the specified number of blocks up or down from the set starting location.
*groupall - the builder will build all of a group of materials at once, instead of doing it per layer.
*ignoreair - the builder will not place air blocks. (Use to build into an existing structure, pointless if used with excavate)
*ignoreliquid - the builder will not place lava or water blocks. (Use if the schematic has unconstrained liquids on the bottom.)
*onstart:Task - the builder will run the [[Denizen]] task script on start of build (after material collection). See [[#Advanced Usage]]
*oncomplete:Task - the builder will run the [[Denizen]] task script on completion of build. See [[#Advanced Usage]]
*oncancel:Task - the builder will run the [[Denizen]] task script on cancellation of build. See [[#Advanced Usage]]
*silent - the builder will not send completion/error messages to the command sender.

Examples:
/builder build
/builder build excavate reverselinear yoffset:-3
/builder build ignoreair ignoreliquid oncomplete:Celebrate
/builder build groupall layers:3

'''/builder cancel''' - Cancel a build job.

'''/builder info''' - View a Builder's loaded schematic name and size, as well as the builder's options and status.

'''/builder survey (excavate)''' - Display a list of all the block types/count it would require to build at the current location. Specify excavate to show the list of materials if excavation is used. Does not show water or lava.

'''/builder supply true|false''' set whether the builder will need to be given the materials before he will start building. See [[#Supply Mode]]

'''/builder hold true|false''' set whether the builder will hold the items he is placing (Turn off only for compatibility with other plugins like [[Sentry]])

'''/builder reload ''' - reload options from the builder config.yml

'''/builder help''' - Display the help.

==Usage==
*.schematic files should be placed in the ''/plugins/Builder/schematics/'' directory. This directory can be configured in the config.yml
* Position the builder, or set the builder's '''origin''', to the ''center'' of the footpoint you want to build before calling '''build'''. The size of the schematic is shown upon load.
* You can cancel a build and resume it later if you have an Origin set. You can use <code> /builder origin current </code> to set the origin after building has started if you forgot.
* Do not try to resume a build with the excavate option!
* The builder will ignore any empty space underneath the schematic object so that it will always rest on the ground where the builder starts. If you want to build above or below the origin, use the yoffset: build option.
* The builder will not attempt to replace blocks that are already set properly, this means you can use a builder to quickly 'restore' any changed blocks in something he has previously built.
**To set up a builder to maintain an existing building:
***Select the building with worldedit and save it as a schematic.
***Copy the schematic to the builder's schematics directory.
***Load the schematic to a builder and call <code> /builder origin schematic</code>.
***Call /builder build and the builder will place any missing blocks or destroy new ones.
*Rail and dispensers my not be placed correctly. (Hey this is Construction, not Engimaneerin'.)
*By default, NPCs despawn when their chunk unloads. This behavior can be changed in the Citizens2 config.yml, and is recommended if you would like builders to continue to work unattended.

==Supply Mode==
If the Builder is set to require materials for building (with ''/builder supply true''), he will go into Supply Mode when ''/builder build'' is called. When Supply Mode starts the Builder will survey the build site and generate a list of required materials to start building. Players must provide these materials for the builder to begin.

While in Supply Mode:
* Right-Click the Builder with an empty hand to view the list of materials still needed.
* Right-Click the Builder with any block or item to see if he needs it. If he does, he will tell you how much he still needs.
* After clicking with a needed material, Right-Click again within a few seconds to give it to the Builder.
* After receiving a material the Builder will say how many more blocks he needs in total to begin, or he will begin building if he has everything.

What materials are required:
*By default all blocks require their normal drop type (i.e. Cobwebs require String)
*This behavior can be overridden via the 'supply.txt' file found in the \Builder folder.
**Each line contains the Item ID of the block in the schematic, and the ItemID of the block/Item that is required.
**Optionally you can specify the number of blocks/items required for each source block.
**Setting the required Item ID to 0 will not include that source block in the requirements.

{| class="wikitable collapsible collapsed"
! Default Supply Mode configuration
|-
|<pre>
Original Block Number:Require Item Number:Amount(Optional)
Set to 0 to never require block. Blocks not specified will require their normal drop item.
90:0
97:0
95:54
78:0
34:0
119:0
80:80
92:354
43:44:2
125:126:2
20:20
102:102
47:47
103:362
130:130
134:53
135:53
136:53
128:67
109:67
108:67
79:332
51:0
59:295
72:70
71:330:0.5
26:335:0.5
</pre>
|}

All blocks are currently matched on Item ID only. This means:
* All Wool is Wool. Color is ignored building the list, and any color wool can be given to fulfill the requirement.
* The same goes for saplings, slabs, logs, and wood planks.
* Stairs are similar. All wood stairs count as 'oak'. All stone/brick stairs count as 'stone' with the exception of nether brick stairs which are separate.

If the build is canceled at any point, the collected materials are lost.

==Advanced Usage==
* Builder can be set to run [[Denizen]] Task Scripts on start, completion, or cancellation of a build.
**The NPC must have both the Builder and [[Denizen]] Trait.
**Call <code>/builder build</code> with the optional modifiers
***<code>onstart:TaskName</code>
***<code>oncomplete:TaskName</code>
***<code>oncancel:TaskName</code>.
Example:
/builder build oncomplete:DespawnTask oncancel:AnnounceTask

*Builder can also run [[Denizen Actions]] at the 3 indicated events. Add the following to the NPC's actions:
**"Build Start"
**"Build Complete"
**"Build Cancel"
Example:

<code>
BuilderAssignment:
type: assignment
actions:
on Build Start:
- ANNOUNCE "Let's do this!"
on Build Complete:
- ANNOUNCE "I have finished!"
</code>

For more complex examples with Denizen and Builder see [[Builder/Builder_and_Denizen|Builder and Denizen Examples]]

==FAQ==
Q: How can I use multiple builders on one project?

A: You can use up to 4 builders on one project by giving them all the same schematic and origin, but different build patterns. You can also manually split your schematic into multiple parts with WorldEdit or MCEdit.

Q: How can I make builders go faster?

A: Use the /builder timeout command to set the max time between blocks. You can also make the builder walk faster with "/npc speed"

[https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=JVBJLN5HJJS52&lc=US&item_name=jrbudda&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted Donate to jrbudda]